How to Make Dinobot Slag G1: A Complete Guide to Making a Real Slag

How to Make Dinobot Slag G1: A Complete Guide to Making a Real Slag

December 10, 2021 Comments Off on How to Make Dinobot Slag G1: A Complete Guide to Making a Real Slag By admin

It’s one of those things that you probably already know about.

But do you know what it is?

Dinobots have a knack for making slags, as a tool of production.

Slags are basically just pieces of metal that you can put on top of other metal pieces, and they’re used to make metal objects, like car parts.

But what makes slag such a great industrial waste is that it’s incredibly durable.

Slag is also recyclable, and can be recycled at a variety of industries.

But for those who are not familiar with it, slag is basically just a metal object that you rub with oil to make it lighter.

Slagging is a great way to make a metal product that is extremely durable, and you can do it at home or on a factory floor, but you don’t have to spend any money to make this happen.

Slog can be made from scrap metal, metal scrap, or even plastic.

It’s a lot of different things, and making a metal item that’s a perfect match for your specific needs and your budget is extremely easy.

Let’s start with making a few things first.

First, you’ll need a scrap metal scrap container.

This is a metal container that you’ll use to store your metal slag, and which is usually available for a price anywhere from $5-$20.

Next, you’re going to need a large piece of scrap metal that’s at least 3 feet wide.

That will be the most common size of metal scrap you’ll find.

For a few different reasons, you might want to get metal scrap in the size of a pickup truck, or a military truck, but don’t be tempted to go all out with your metal scrap.

For the purposes of this tutorial, we’ll be using scrap metal.

For this tutorial you can get scrap metal for about $5 or less at any scrap metal store.

After you have the metal scrap ready, it’s time to start your metal making.

First things first, you need to find the scrap metal container you’ll be building your slag out of.

You can find a scrap steel container at most scrap metal stores, or you can go the DIY route and use the metal you just scraped yourself.

You’ll also want to buy a metal scrap that’s 3 feet or less wide.

This will allow you to build a slag that’s not too large and that doesn’t need to be as heavy as you would with a steel scrap.

To do this, you can either buy a piece of metal and cut it into pieces, or use a saw and cut the pieces into smaller pieces.

After the metal is cut, it will be ready to use as a slanger.

You’re going for a 3-foot piece of steel, and if you have enough scrap metal in the container, you should be able to build an 8-foot-long slanger in about 15 minutes.

Make sure to get at least one of the metal pieces that you cut from the scrap steel you already have, so that you have plenty of space to build your slanger out of it.

For our slanger, we’re going with a 3.75-inch piece of 3-ton steel.

We’ll be making this piece out of scrap steel, so we’re looking for about a 1-foot wide piece of plastic that’s about 1.75 inches wide.

Next up, we want to cut out the metal from the scraps we just scrapbed together.

Make the cuts out of a piece that is at least 1.5 inches wide, and then cut the rest of the plastic piece in half to make an 8.25-inch slanger piece.

After cutting out the plastic, we need to glue in the pieces of scrap that we just cut out of the scrap.

We used a metal scraper, which is really easy to get to, and we found it was $4.50 at Harbor Freight.

We also found it had about two minutes to glue everything together.

Next comes the fun part.

The process of making metal slags is really just the same as it is for metal scrap metal: you’ll cut the metal into smaller and smaller pieces, then you’ll drill a hole in the center of the slag.

The hole will then be filled with oil, and a piece called a filler will be added to it to hold it in place.

The filler can be either a regular metal filler, or it can be a special type of filler, like polystyrene.

When you fill the filler with oil and glue it to the hole in your metal, it gives the slanger a more robust structure that is able to withstand a lot more oil than you’d expect from the metal.

Once the metal filler is glued to the slange, it can then be pulled out, and it can now be used to